Hitachi CG36DL (L) Mode D'emploi page 17

Cover
Cover holder
CAUTION
●
Take care to avoid cutting yourself on the knife
inside the cover.
●
Install the cover and knife properly and securely
as instructed in the handling instructions.
If not attached properly or securely, they may
come off and cause injury.
4. Installing the shoulder belt
Use in combination with a BSL3620 battery.
WARNING
●
Be sure to attach the shoulder belt so that the
grass trimmer can be carried correctly.
●
If you get the feeling the gardening appliance is
not operating normally, turn off the motor
immediately, remove the quick-release bracket of
the shoulder belt and remove the gardening
appliance.
CAUTION
●
If you do not support the gardening appliance
when you pull the quick-release belt, it may fall
causing injury or damage.
Hold the main pipe with one hand while you pull
with the other hand.
●
Make sure the quick-release function operates
normally before you start working.
(1) Place the shoulder belt on the shoulder as shown
in Fig. 12 and engage it with the hanger on the
gardening appliance. Adjust the shoulder belt to
suitable length.
(2) To remove the gardening appliance from the
shoulder belt, support the gardening appliance by
holding the main pipe with one hand and use the
other hand to pull the quick-release belt as shown
in Fig. 12 to free it from the bracket.
M6 × 25 hex.
socket button
bolts (2 pcs.)
Cover bracket
Fig. 11
(3) To strap on the gardening appliance, insert the
bracket in the hook and insert the quick-release
bracket over the hook and into the wide opening
of the bracket. (Fig. 13)
Gently pull the shoulder belt to make sure that it is
properly attached.
Quick-
release
belt
Hook
5. Installing the hanger belt
Use in combination with a BL36200 battery.
WARNING
●
Be sure to attach the hanger belt so that the grass
trimmer can be carried correctly.
●
If you get the feeling the gardening appliance is
not operating normally, turn off the motor
immediately, press the release mechanism of the
hanger belt and remove the gardening appliance.
CAUTION
●
If you do not support the gardening appliance
when you press the release mechanism, it may
fall causing injury or damage.
Hold the main pipe with one hand while you push
with the other hand.
●
Make sure the release function operates normally
before you start working.
(1) Hook the hanger belt to the BL36200 harness (two
places) as shown in Fig. 14. Then hook the belt to
the hanger of the main pipe (one place). Adjust
the hanger belt to a suitable length.
English
Bracket
Main pipe
Hanger
Fig. 12
Quick-
release
bracket
Bracket
Fig. 13
17