Yamaha YID-W10 Mode D'emploi page 8

Transmitter
LED
Green: flashes The sound is
interrupted.
Red: Off
Green: flashes No sound.
or lights up
Red: flashes
Green: flashes Controlling
or lights up volume on your
iPod does not
Red: flashes for work.
a short time
Green: flashes No sound.
twice
Red: Off
6
En
Problem
There is a device
(microwave oven, cordless
phone, Wi-Fi, etc.)
outputting signals in 2.4
GHz frequency band nearby.
The signal from the
transmitter is blocked by
your body, metallic objects,
or wall, etc.
The position of the
transmitter is too far from
the receiver.
Communication error of
your iPod/iPhone, and the
transmitter.
Your iPod is recognized as
an unsupported model.
Communication error of
your iPod/iPhone, and the
transmitter.
Cause
Move YID-W10 away from
the device.
Change the position of the
transmitter to avoid the
object blocking the signal.
Move the transmitter closer
to the receiver.
Reconnect your iPod/iPhone
to the transmitter firmly.
If this status occurs
frequently, disconnect your
iPod/iPhone from the
transmitter, restart it, and
then reconnect firmly.
Use an iPod supported by
YID-W10.
If your iPod is the supported
model, reconnect it to the
transmitter firmly.
If this status occurs
frequently, disconnect your
iPod from the transmitter,
restart it, and then reconnect
firmly.
Reconnect your iPod/iPhone
to the transmitter firmly.
If this status occurs
frequently, disconnect your
iPod/iPhone from the
transmitter, restart it, and
then reconnect firmly.
Remedy