Yamaha YID-W10 Mode D'emploi page 10

Specifications
Supported iPod (as of April 2010)
.... iPod (5th generation), iPod classic, iPod nano,
Supported iPhone (as of April 2010)
...........................iPhone, iPhone 3G, iPhone 3GS
Frequency ................................................... 2.4 GHz
Transmission Range .................Approx. 20m (66 ft)
Number of units which can be simultaneously
transmitted to (YIT-W11TX)
...Up to 7 units (depending on the circumstances)
Latency ........................................................... 12 ms
Power Consumption (Charging)........................ 4 W
Power Consumption (No charge) ....... Less than 1W
INPUT / OUTPUT ........................................DOCK
Dimensions (W x H x D)
YIT-W11TX ........................45.3 x 94 x 17.6 mm
YIR-W10 ...................................91 x 54 x 88 mm
Cable Length (YIR-W10)....................1.2 m (3.9 ft)
Weight
YIT-W11TX .....................................42 g (1.5 oz)
YIR-W10 ........................................260 g (9.0 oz)
Operating temperature range
........................................ 5 to 35 °C (41 to 95 °F)
* Specifications are subject to change without notice.
8
En
iPod touch
(without interference)
(1-3/4 x 3-3/4 x 0-3/4 in)
(3-5/8 x 2-1/8 x 3-1/2 in)
The " " and "AirWired" are
trademarks of Yamaha Corporation.
iPhone, iPod, iPod classic, iPod nano and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
"Made for iPod" and "Made for iPhone"
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone, respectively, and has been certified
by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.