Turntable Operation - Crosley T300A Manuel D'utilisation

English
Stereo System Connection
RCA Jacks
 The RCA Jacks output analog line-level signals and could be connected
directly with a pair of active/powered speakers or the appropriate input of your
stereo system.
 The Red plug connects with the Right channel and the White plug connects
with the Left channel.
Note: The RCA Jacks are not designed to be connected directly to the passive/unpowered
speakers. If connected to the passive speakers, the volume level will be very low.

Turntable Operation

1. Press the Power Button to turn on the power.
2. Press the Speed Button to select the platter speed accordingly.
3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
5. Release the tonearm Hold Down Clip.
Note: when the turntable is not in use, remember to lock back hold down clip.
6. Use the Cue Lever to lift up the tonearm.
7. Gently move the tonearm over the record where play is desired to begin. Set
the Cue Lever back to the down position, the tonearm will descend slowly
onto the record and begin playback.
8. When the record is finished playing, the tonearm will automatically return to
its rest.
9. To stop the playback, press the Reject Button and the tonearm will return to
the Tonearm Rest automatically.
10. Lock the Tonearm Clip to secure the tonearm.
Note:

When the tonearm is automatically returning to the tonearm rest, do not interfere with
the tonearm's motion, or damage to the automatic return mechanism may occur.
.
6