dirna Bergstrom bycool green line SPLIT Mode D'emploi page 13

SPLIT
EVAPORATOR
1 Position the evaporator in the most suitable part
of the cabin in vertical position.
2
Take down the cover and coil and mark the
evaporator support points. The unit can be
secured to the tray directly with screws or using
the supplied support pieces.
2
3
Bore Ø8.5 holes for throughbore or Ø11 to
position M8 rivet nuts.
4
If you want to take out the piping through the
right side of the tray: bore Ø35 for pipe output
and position the sleeve.
Air conditioning for vehicles
1
2
13
EN
4