Technical Specifications - ECG VP 3101 S Mode D'emploi

3. Clean the motor fi lter once a year: Open the front cover, remove the fi lter, wash it with warm water and dry
thoroughly before using it again. If the fi lter is damaged, replace it (Fig. 11).
4. Cleaning of the appliance surface: Use soft and slightly moistened cloth with a few drops of the cleaning
solution to clean. Never use solvents or other abrasive cleaners. Never immerse the vacuum cleaner into
water or any other liquid and do not leave it under running water.
8
Attention:
Replacement fi lter bags for the VP 3101 S vacuum cleaner can be found under the name KOMA ECG 3101 S.
TROUBLESHOOTING
Before referring to a service centre, check the following list of common problems and how to remove
them.
Problem
The motor will not The vacuum cleaner is not
start. powered.
The suction power is Full dust bag, clogged hose or
reduced. tube, dirty fi lters.

TECHNICAL SPECIFICATIONS

Suction power: 180 W
Range: 7.8 m
Dustbag capacity: 2.5 l
Weight: 3.7 kg
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
9
Possible cause
10
Solution
Check the power cord and plug. Refer to an
authorized service centre if the problems persist.
Replace the dust bag, remove foreign objects
from the hose or tube, replace fi lters.
Nominal voltage: 230 V~ 50/60 Hz
Nominal input power: 800 W
Maximum power consumption: 1000 W
Noise level: < 78 dB
11
08/05
31
GB