ENGLISH
•
The door glass & the outside surfaces of the oven get
very hot during use. Oil & other cooking liquids may also
get very hot during use. Always use the handle provided
and wear oven gloves when opening the door & when
removing trays from the oven.
•
Switch off the appliance and disconnect from supply
before changing accessories or approaching parts that
move in use.
Safety of others
•
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
•
Children should be supervised to ensure that they do not
play with the appliance.
•
Do not allow children or any person unfamiliar with these
instructions to use the appliance.
•
Do not allow children or animals to come near the work
area or to touch the appliance or power supply cord.
•
Close supervision is necessary when the appliance is
used near children.
After use
•
Switch off and remove the plug from the socket before
leaving the appliance unattended and before changing,
cleaning or inspecting any parts of the appliance.
•
When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating plate.
This product must be earthed. Always check
that the mains voltage corresponds to the
voltage on the rating plate
•
Appliance plugs must match the outlet. Never modify the
plug in any way.
•
Do not use any adapter plugs with earthed (Class 1)
appliances. Unmodified plugs and matching outlets will
reduce the risk of electric shock.
•
To avoid the risk of electric shock, do not immerse the
cord, plug or motor unit in water or other liquid.
Extension cables & class 1 product
•
A 3 core cable must be used as your tool is earthed and
of class 1 construction.
•
Up to 30m (100 ft) can be used without loss of power.
•
If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER
Service Centre in order to avoid a hazard.
4
(Original instructions)
Labels on Appliance
The following pictograms along with the date code are shown
on the appliance:
Warning! Hot surface.
Features
1. Double glass door
2. Door Handle
3. Heating elements
4. Indicator light
5. Function knob 1
6. Function knob 2
7. Temperature knob
8. Timer knob
9. Baking tray
10. Wire rack
11. Crumb tray
12. Rotisserie fork
13. Handle for Rotisserie fork
14. Oven cavity
15. Enclosure
16. Tray handle
Unpacking
•
Remove all packaging from the appliance.
•
Inspect the oven after unpacking for any damage such as
a misaligned or damaged door, door seals, dents or holes
in the door window, and any dents in the cavity. If any of
these are seen, DO NOT use the oven.
Assembly
Warning! Before assembly, make sure that the appliance is
switched off and unplugged and the timer knob is in the
"OFF"position.
•
Place the appliance on a flat, even surface.
•
Remove all accessories. Wash in hot soapy water or in
dishwasher.
•
Thoroughly dry all accessories and insert into oven. Plug
oven into outlet and you are ready to use your new
electric oven with grill rack and food tray.
•
The first time the oven is used, smoke may emerge. This
is normal. It is due to the protective substance on the
heating elements, which is used to avoid salt effects
during shipping from factory.It is recommended operating
the oven dry for about 15 minutes. Also, make sure the
room is well ventilated.
Use
Make sure you familiarize yourself with the following oven
functions and accessories prior to first use: