The Meanings Of Warnings And Symbols; Foreword; Installation; General Standards And Warnings - Keyfrost KBA Manuel

The meanings of warnings and symbols

The warnings listed in this manual are classified according to their severity and probability of occurrence.
Indicates a situation of imminent danger which, if not avoided, will result in death or serious injury
Certain types of hazards are represented with special symbols:
CUTTING SURFACES
TEMPERATURE ESTREME
HIGH VOLTAGE
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
It can also be used to indicate dangerous practices.
Indicates situations that may cause damage exclusively to equipment or property.

Foreword

This manual contains all information necessary for the correct installation, use and maintenance of the equipment. The manual is for technical
personnel who are qualified to install and service the equipment. It is also for the end user in order to ensure that he or she will use the
equipment correctly. The manual is to be considered as an integral part of the machine. It is obligatory for the user to read it carefully and to
refer always to the manual before carrying out any installation or start operations.
The manual, or in any case a copy thereof, should always be kept in close proximity to the machine in order for consultation by the end user
whenever necessary.
Tampering with this manual, even partially, is strictly forbidden (copyright © )
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE OF THE MACHINE AND/OR DERIVING FROM THE

Installation

1.

1.0 General standards and warnings

Inspection test and guarantee

1.0.1

Inspection Test

1.0.1.1
All equipment must pass inspections and tests before it is dispatched. Inspection test types are :
- visual.
- leakage control.
- optimal vacuum attainment.
- electrica.
-operation.
Equipment is dispatched ready for use. Passing of inspection tests is certified in the specific annexes.

Guarantee

1.0.1.2
All our units and the parts of our production, with exclusion or electrical parts, are guaranteed against production defects for 12 months
starting from invoice date. The electrical and electronic parts are guaranteed 6 months and are covered by warranty only if the issue
does not depend on wrong supply or connection.
Materials found to have defects must be returned carriage free to the factory of dispatch, where they will be checked and repaired or
replaced in the event that, in our final judgement, they are found to be defective.
It will be the specific task of the manufacturer to repair any defects on condition that the equipment has been correctly used in full
respect of the guidelines given in the manuals.
This guarantee does not cover chance defects such as those caused during transport, handling or interventions carried out by personnel
not authorised by us, improper use, or the incorrect installation of the equipment. Materials replaced under guarantee will remain our
property.
The warranty will be cancelled in case of any unauthorized intervention or in case of absence of periodic ordinary maintenance. The
ordinary maintenance is considered at the expense of the final user.
In case of substitution of the product or one of his components, on the unit or on the single part does not start a new warranty period,
but one should consider the original invoice date.

Machine description

1.0.2
The machines described in this manual are refrigerator units with water-cooled or air condensers. The machine includes :
- a condenser on the cold room exterior
- an evaporator on the cold room interior
- a control panel
- supplied fittings
16
NONOBSERVANCE OF THE WARNINGS INCLUDED IN THIS MANUAL.
Manual
DANGER!!!: