Do not forcefully locate the switch in the ON position, or make
EN
any authorised changes to the switch in order to make it stay
in the ON position. This could lead to steam escaping from
around the lid, damaging the automatic switch-off mecha-
nism and possibly causing bodily injury.
The appliance must not be immersed in water, remember this
is an electrical appliance.
Only clean the appliance using a damp cloth.
To disconnect, turn any control to «off» then remove plug
from wall outlet.
Always unplug the appliance by holding the plug, not the
cord.
Do not let cord hang over edge of table or counter, or touch
hot surfaces.
Unplug the power cord from the wall outlet when the kettle is
not in use and before cleaning. Allow to cool before putting
on or taking off parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or has been damaged in
any manner. Return appliance to the nearest authorized ser-
vice facility for examination, repair or adjustment.
Never attempt to exchange the mains cable of the appliance
as special tools are required for this. To ensure continued
safety of the appliance, if the cable needs to be repaired or
exchanged, have this carried out exclusively by a customer
service workshop authorised by the manufacturer.
To protect against fire, electric shock and injury to persons do
not immerse cord, plug, kettle container and power base in
water or other liquid.
Do not operate the kettle on an inclined plane. Do not operate
the kettle unless the element is fully immersed. Do not move
while the kettle is switched on.
6