Quick Start-Up Guide; Important - Techly I-ALARM-KIT001 Manuel D'installation

Quick Start-up Guide

Connect your System
Using the GSM transmitter (SIM card)
Open the battery compartment at the back of the control panel and insert a SIM
card in the control panel.

Important

Before using the Alarm System in GSM mode, you need to purchase a SIM card
that works on the GSM network with 850 / 900 / 1800 / 1900 MHz frequency. We
recommend you to subscribe to a plan with unlimited texts and one hour of voice.
For more information, please contact your local reseller.
Important
Make sure the SIM card does not require any PIN code. For more information,
please contact your local reseller.
Turning your System on
1. Plug the AC adaptor to an AC socket.
2. Plug the output connector of the AC
adaptor into the adaptor interface in
the battery compartment at the back
of the control panel.
3. Turn the power switch to "ON" (in the
battery compartment at the back of the
control panel).
4