Address Setting; Dmx 512 Configuration - Nicols WP 500 Z Manuel D'utilisation

4.2 Address Setting

If you use a universal DMX controller to control the units, you have to set DMX address from 1 to 512 so that the units can
receive DMX signal.
When it will receive the DMX512 control signal, signal X disappear, now it can be controlled by controller signal

4.3 DMX 512 configuration

19 channel mode:
Channel Function
CH 1 X rotation
CH 2 Y rotation
CH 3 X fine adjustment
CH 4 Y fine adjustment
CH 5 XY Motor speed
CH 6 Dimmer
CH 7 Strobe
CH 8 R dimming
CH 9 G dimming
CH 10 B dimming
CH 11 W dimming
CH12 A dimming
CH13 U dimming
CH 14 Color selection
CH 15 Built-in Program
CH 16 Built-in
function speed
CH 17 ZOOM
CH 18 X/Y mode forward and
back rotation
CH 19 Auto,Sound and Reset
Instruction
（0-255）UP to adjust forward rotation and DOWN to adjust back
rotation
（0-255）UP to adjust forward rotation and DOWN to adjust back
rotation
X 16BIT（0－255）.
Y 16BIT（0－255）.
0-255 UP to adjust the speed from fast to slow, 0 is the fastest
speed
（0－255）R、G、B、W dimming，Linear dimming, from dark to
bright
（0－255）R、G、B、W strobe, from slow to fast
R dimming，（0－255）Linear dimming, from dark to bright
G dimming，（0－255）Linear dimming, from dark to bright
B dimming，（0－255）Linear dimming, from dark to bright
W dimming，（0－255）Linear dimming, from dark to bright
A dimming，（0－255）Linear dimming, from dark to bright
U dimming，（0－255）Linear dimming, from dark to bright
0-255 color
60:G+R++；61-80:G+B++；81-100:B+G++；101-
120:R+G+B++；121-140:R+B+G++；141-160:B+G+R++；161-
200:R+B+G++；201-220:B+G+R++；221-255:R+B+G++)
(0-10) first 14chs enabled, DMX value above 10, add each 5 value
correspond to a built-in program.
Program Speed from fast to slow
（0-128）ZOOM positioning；（129-255）Focus change from 0
to maximum
（0-64）No function；（65-128）X back rotation；（129-192）Y
back rotation；（193-255）X/Y back rotation。
（0-64）No
192）Sound；（193-255）Reset.
change (0-20:R+G++；21-40:R+B++；41-
function；（65-128）Auto；（129-
14