ARDES AR5BL2 Mode D'emploi page 12

To remove batteries, open the batteries holder placed on the back of the remote control, by
sliding the cover to the outwards.
"ON/OFF" button (A)
When the device is switched off, press this button to turn it on.
When the device is switched on, press this button to turn it off.
LIGHT button (B):
Press this button to activate or deactivate the light (2).
SCREEN OFF button (C):
Press this button to activate or deactivate the display (3). When the display is off, other
buttons on the remote control do not work.
SPEED buttons (D, E):
Press "SPEED +" (E) for increase the speed.
Press "SPEED –" (D) for reduce the speed.
Speed setting 1,2,3 is showed on the display (3).
"TIMER" button (F, G)
Press the TIMER button when the device is working to program automatic switch-off at an
interval of between 1 to 9 hours from when it is programmed. Every time the button is
pressed, the interval increases (G) or decreases (F) by one hour.
Timer setting is showed on the display (3).
"OSC" button (E)
Press this button to activate or deactivate the automatic swing function of the device.
MULTIFUNCTION button (4)
Press it (short pression) to select: speed 1, speed 2, speed 3, OFF.
While the fan is on, press it for 3 seconds to activate or deactivate the automatic swing
function of the device.
(EN) MAINTENANCE
Before carrying out the regular cleaning operations turn off the fan and unplug it.
DO NOT disassemble the fan: this fan cannot be disassembled.
For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
When you do not use it, after cleaning it, store the fan in a dry place.
12 / 46