Remington PF7400 Mode D'emploi page 5

Masquer les pouces Voir aussi pour PF7400:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
ENGLISH
, SHAVING
Stretch the skin with your free hand so the hairs stand upright.
Hold the shaving head so that the foils touch your face.
Use short linear strokes.
, TRIMMING
Slide up the trimmer release button to activate the trimmer.
Hold the trimmer at a right angle to your skin.
To retract the trimmer, push the top rear of the trimmer down until it locks
under the trimmer release button.
E
Tips for best results
Always hold the shaver at right angles to the skin so that all foils are
touching the skin with equal pressure.
Use moderate to slow stroking movements. The use of short linear motions
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
DO NOT press hard against the skin in order to avoid irritation and damage
to the foil heads.
C CLEANING AND MAINTENANCE
To ensure long lasting performance clean after each use.
Ensure the appliance is switched off and unplugged from the mains.
The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
, DRY CLEANING
Pull the foil assembly up to remove from the hair pocket.
Gently tap out the excess hair shavings and use a cleaning brush to clean
out the hair pocket if necessary.
, Note: Do not use a brush to clean the shaving foils.
Replace the head assembly.
, WASHABLE CLEANING
Pull the foil assembly up to remove from the hair pocket.
Do not use the brush to clean the foils but blow the shavings out or rinse in
running water.
Use the cleaning brush to sweep any loose hairs from the cutter and
trimmer. Rinse in running water.
Replace the head assembly.
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pf7500

Table des Matières