Using The Appliance - Philips HD7311 Mode D'emploi

1 Remove all packaging materials and foils from the teapot and the base.
2
Note: Do not place the base near a hot stove.
3 Unwind the cord from the reel in the base until it has the desired length. Wedge the cord
into the slot in the base. (Fig. 4)
4 Rinse the inside of the teapot with hot water. If you want, you can use a soft brush and some
washing-up liquid (Fig. 5).
Do not immerse the teapot in water. Make sure the connector on the underside of the teapot
stays dry.
5
some washing-up liquid (Fig. 6).
6 Rinse the lid (Fig. 7).

using the appliance

1 Remove the lid of the teapot (Fig. 8).
2
3 Fill the teapot with the desired amount of cold water. Make sure the water level is between
the MIN indication (250ml) and the MAX indication (700ml). (Fig. 9)
4
yet (Fig. 10).
5 Put the mains plug in an earthed wall socket (Fig. 11).
6 Press the on/off button to switch on the appliance (Fig. 12).
The quick-select buttons and the personal settings button light up.
,
7 Decide what type of tea you want to brew.
- With one of the four quick-select buttons, which are preprogrammed with the ideal water
temperature and steeping time, you can brew black tea (1), green tea (2), fruit and herbal tea
(3) or rooibos tea (4) (Fig. 1).
- With the personal settings button you can brew a type of tea that you cannot choose with the
quick-select buttons or you can brew tea at different settings than the preprogrammed settings.
When you use this button, you can adjust both the water temperature and steeping time
yourself with the increase and decrease buttons (Fig. 2).
EnglisH
9