Product Description - Jaga Dynamic Clima Beam T 20 Instructions D'installation

4. PRODUCT DESCRIPTION
Jaga Clima Beam cools in the most fective way: The rising hot air is drawn in by the DBE fans. The air
that has been cooled via the heat exchanger is blown out and then slowly drops evenly into the room.
With the "dry cooling" principle there is no energy loss due to the formation of condensation. Jaga
Clima Beam is also suitable for heating. The Low-H2O heat exchanger is equipped with fans in order
to optimally transfer the heat or cooling. The built-in Jaga Dynamic Product Controller (JDPC) makes
it possible to control the DBE units. Control is via a 0-10V signal through a building management
system (BMS) or a room thermostat.
12V
Low-H2O heat exchanger
(T20 of T21)
DBE-rail
JDPC
power : in : 100-240V
waterproof connector
Off : 12V
mounting plate
EN EN
49