Recording - Sony TA-FB940R Mode D'emploi

Recording

TA-FB940R
1
PROTECTION
POWER
EON LINK TAPE1/DAT TAPE2/MD AUX SACD/CD TUNER PHONO
EON LINK SPEAKERS BASS TONE TREBLE BALANCE
A 0 0
OFF • B • • • LOUDNESS SUBSONIC
A + B Ø ON ø OFF Ø ON ø OFF
PHONES
– 10 + 10 – 10 + 10 LEFT RIGHT
z
You can record the same
source on two recording
components at the same
time
z
You can monitor the
recorded sound (Tape
Monitor function)
You can monitor the
recorded sound if the tape
deck you are recording on
has separate playback and
recording heads.
To monitor the sound, set
TAPE MONITOR to TAPE1
or TAPE2.
Note that on the TA-FB740R,
you can monitor the only
sound being recorded from
the TAPE1/DAT jacks.
Note
Before you begin recording, press
the EON LINK button to turn off
the EON LINK indicator (see
page 8).
3
VOLUME
INPUT SELECTOR
TAPE MONITOR
SOURCE DIRECT
0 10
SOURCE
•
TAPE1 TAPE2
1
Press POWER to turn on the amplifier.
2
Turn on the programme source you want to record.
3
Select the programme source that you want to record by
turning INPUT SELECTOR.
The indicator for the programme source lights up.
To record a
Record
Radio broadcast
Compact disc or SACD
Source connected to AUX
Source connected to:
—TAPE1/DAT
—TAPE2/MD
4
Prepare the recording component for recording, then start
recording.
5
Start playing the programme source.
TA-FB740R
1
PROTECTION
POWER
EON LINK
SPEAKERS BASS TONE TREBLE BALANCE
A 0 0 •
OFF B • • •
A + B
PHONES
– + – +
10 10 10 10 LEFT RIGHT
Set INPUT SELECTOR to
PHONO
TUNER
SACD/CD
AUX
TAPE1/DAT
TAPE2/MD
Basic Operations
3
INPUT SELECTOR VOLUME
SACD/CD
AUX TUNER
TAPE2/MD PHONO
TAPE1/DAT
TAPE MONITOR LOUDNESS SOURCE DIRECT SUBSONIC
SOURCE
TAPE1 Ø ON ø OFF 0 10 Ø ON ø OFF
GB
9