Indexing Program Sources; Recording - Sony TA-VE910 Mode D'emploi

Basic Operations

Indexing Program Sources

You can enter a name of up to 8 characters for program
sources. These index names (for example, "VHS")
appear in the amplifier's display when a program
source is selected.
Note that no more than one name can be entered for
each program source.
This function is useful for distinguishing components
of the same kind; 2 VCRs, for example, can be specified
as "VHS" and "8MM," respectively. It is also handy for
identifying components connected to jacks meant for
another type of component; for example, a second CD
player connected to the TUNER jacks.
DPC MODE
POWER
TONE
SUR INDEX
DPC
MODE
SPEAKERS
A
OFF B
A + B
PHONES
DIMMER DISPLAY
DISPLAY
1
Select the program source (component) to be
named.
2
Press DPC MODE repeatedly until the INDEX
indicator lights up.
3
Create an index name by using the digital
processing control buttons as follows:
Press or
to move the cursor to the next position.
The index name is stored automatically.
To insert a space
Press or
display (the space is between " " " and "A").
If you've made a mistake
Press or
want to change flashes. Then select the right
character.
To assign index names to other sources
Repeat the procedure above.
EN
14
Digital processing
control buttons
VIDEO 1 VIDEO 2 VIDEO 3 LD TV TAPE DAT / MD CD TUNER PHONO
STANDBY
DIRECT PASS
DISCRETE
BASS
BOOST
DIRECT SOUND FIELD
PASS SET UP ON / OFF
VIDEO FUNCTION AUDIO FUNCTION GENRE MODE
INPUT
MODE
VIDEO/AUDIO FUNCTION
to select a character, and then press
until a blank space appears in the
repeatedly until the character you
z
You can display either the program source name or
component originally meant for the selected jacks
Each time you press DISPLAY, the display switches
between the component originally meant for the
selected jacks and the program source name.

Recording

This amplifier makes it easy to record to and from the
components connected to the amplifier. You don't
have to connect playback and recording components
directly: once you select a program source on the
amplifier, you can record and edit as you normally
would using the controls on each component.
Before you begin, make sure you've connected all
components properly.
MASTER VOLUME
POWER
TONE
SUR
DPC
MODE
BALANCE
L R SPEAKERS
VIDEO 3 INPUT
A
B
OFF
A + B
S VIDEO VIDEO L AUDIO R
PHONES
DIMMER DISPLAY
Playback component
(program source)
ç: Audio signal flow
c: Video signal flow
Recording on an audio tape or MiniDisc
You can record on a cassette tape, Digital Audio Tape
or MiniDisc using the amplifier. See the instruction
manual of your cassette deck, DAT deck, or MD deck if
you need help.
1
Select the component to be recorded.
2
Set the component to be ready for playing.
For example, insert a CD into the CD player.
3
Insert a blank tape or an MD into the recording
deck and adjust the recording level, if necessary.
INDEX
VIDEO 1 VIDEO 2 VIDEO 3 LD TV TAPE DAT / MD CD TUNER PHONO
STANDBY
DIRECT PASS
DISCRETE
DIRECT SOUND FIELD
PASS SET UP
ON / OFF
GENRE MODE
VIDEO FUNCTION AUDIO FUNCTION INPUT
MODE
VIDEO/AUDIO FUNCTION
Recording component
(tape deck, DAT deck,
MD deck, VCR)
MASTER VOLUME
BALANCE
BASS
BOOST
L R
VIDEO 3 INPUT
S VIDEO VIDEO L AUDIO R