The Control Panel; Turning The Machine On - Hoover Nextra Mode D'emploi

40003011Eng.qxd 27/04/2005

The Control Panel

CHRONOVISION
Display
Start Start Delay
Pause
The programme selector must be returned to the OFF
position to reset the controls between each wash cycle.

Turning the machine On

The machine is turned on by selecting a programme via the programme
selector. This status will be indicated by the STOP indicator light flashing, this
light will continue to flash until the machine has started or the machine is
returned to the OFF position.
Start/Pause (
Start
After selecting the programme and the required options press the
once to start the machine. The STOP light will stop flashing and START light
will illuminate and there will be a short time delay to the start of the
programme while the machine sets the wash parameters for the selected
programme and options. If the duration of the programme you have selected
15:14 Page 17
Door Locked Indicator
Pre Wash
Extra Rinse
)
Temperature
Programme
Selector
Selector
Drying Time
Easy Iron
Selector
button
17