Service; The Smartcard Function - KLEIN+HUMMEL KPA Série Mode D'emploi

Furthermore, local presets can be made Read-Only by enabling the "Lock presets" function, in order to preserve the
original settings stored on the amplifier.
The lock code, when set different from 000000, protects the whole Menu locking submenu.
* Available only with optional DSP board

Service

The key to activate this function is factory reserved.

The Smartcard function

There is the possibility to store up to 150 presets for each settings smartcard (shown
activated when the smartcard is inserted in the amplifier, only if the main page of the menu is selected. The store
and recall procedures are identical to those used for local presets as shown in
You can select the desired option by pushing up or down button and "ok" to activate it. The option "Recall local
preset" does not appear if the smartcard is blank.
Operating Manual KPA Series
contacts on the
bottom side
figure 31
figure 32
English
Klein + Hummel
figure 31
). The menu is
figure 32
.
20