Amplifier Name; Local Preset - KLEIN+HUMMEL KPA Série Mode D'emploi

Amplifier Name

The amplifier name, together with the current preset name, can be displayed by enabling the "Display amplifier
data" function. The 20 characters amplifier name, together with the 40 characters preset name is shown in a
different way when the amplifier is in the starting page of the main menu. The amplifier name can be assigned by
the "Edit amplifier name" command (for the text editing, see Local preset handling section).

Local preset

There is the possibility to store up to 50 presets on amplifier local memory.
By choosing the Save local preset command, the current amplifier configuration (basic amplifier settings + DSP
board settings if DSP board is present) is stored on the local memory. To proceed, the menu asks to choose one of
the 50 available presets (see
named <empty>. By pressing ok, you can enter the preset name. The selected character is pointed by the arrow
figure 23
shown in , and by pressing or + keys it is modified. By pressing the key, next character is selected as
shown in figure 24 . When the name input is finished, by pressing the ok key, the preset is stored
Operating Manual KPA Series
figure 22 ), showing the preset number and name. If the preset was never used, it is
Select preset # 1
< empty>
figure 22
Choose pre set na me
figure 23
Choose pre set na me
figure 24
PRESET 1
^
18 SET 1
^
English
Klein + Hummel
17