The Main Menu - KLEIN+HUMMEL KPA Série Mode D'emploi

The fourth line of the screen shows the functions of the buttons below.
The "lock" function is activated if the corresponding button is pressed more than 1 second; in this case all the other
buttons are locked. The same operation unlocks these buttons (unlock code is required - see par. "local preset" for
more details).
The "mute" buttons switch off the two channels independently; in this case the parameters of the correspondent
channel disappear and the writing "muted" appears on the third line. The same operation disables the mute
function.
If the "menu" button is pressed, the main menu is displayed on the LCD screen.

The main menu

figure 11
The shows the main menu. You can scroll the menu items by pushing the up or down buttons and choose
the selected one by pushing "ok" (if the chosen item enables or disables a function, the writing "on" is replaced
with "off" for disabling it, or "on" for enabling it. The menu tree is shown in
Menu
* Available only with optional DSP board
Operating Manual KPA Series
Settings
Displa y
Loca l Preset
figure 11
Settings Amplifier Settings
DSP Settings (or not present) *
Network Settings (or not present) **
Display Bar meters
Output meters
Temperature
Mains meters
Amplifier Name
Local presets
Recall local preset
Save local preset
Setup Setup Hardware info Hardware info
Hardware monitor Hardware monitor
LCD contrast LCD contrast
Set Keylock code
Menu locking
Service
figure 12
figure 12
Output attenuation
Input gain/sens
Input select Analog=>Out
Max output voltage Analog=>DSP=>Out *
Max mains current AES3=>Out *
Clip limiter CH1 AES3=>DSP=>Out *
Clip limiter CH2 K8=>Out
Gate CH1 K8=>DSP=>Out *
Gate CH2
Mute at Power on
Idle Mode
English
Klein + Hummel
.
13