Installation; Installation Instructions - Medion MD 80907 Notice D'instructions

I
NSTALLATION

Installation instructions

• Insert the unit into the proper shaft or select a location to install the unit that
will not affect the driver's ability to drive.
• Connect the cable shortly before finally installing the device. Ensure that this
has been inserted correctly and that the system works properly.
• If changes have to be made to the vehicle, consult your vehicle dealer/
specialist workshop.
• Install the unit in such a manner that no injury can be caused during heavy
braking.
• If the unit is installed out of balance by over 30° to the
horizontal it may affect the output.
• Avoid installing the unit near strong heat sources (e.g.
direct sunlight or heating air), dust, pollution or
excessive shocks.
GB-6