The Iso Adapter Plug - Medion MD 80907 Notice D'instructions

Please use the car radio's ISO block for installation. These adapters can be
obtained from specialist workshops, dealers, or specialist departments of
car equipment warehouses.
If the ISO block is separated from the radio the warranty will become null
and void!
While pushing the radio, take care to ensure that the cables are not
damaged during the process.
• Press the RESET button (23) using the tip of a pen or another pointed object.
• Insert the control panel as described below.

The ISO adapter plug

Use the car's ISO adapter plug for the car radio's ISO socket block to produce a
secure electrical connection.
Back up cable
Ensure that the pink backup cable is pointed towards the permanent plus.
After making all the connections, press the RESET button (23).
Antenna relay cable
The blue cable is available for a relay controlled antenna. The relay extends the
antenna automatically when the radio is switched on. When it is switched off the
antenna is retracted.
This relay cable can also be used to control an external amplifier. Please refer to
the amplifier's operating instructions for the correct connections.
Never connect the blue cable to the engine cable; this could damage the
radio!
MD 80907
Installation
GB
GB-9