Turning Off The Power - Panasonic DG-DV2500E Mode D'emploi

Switching on the power
POWER indicator
POWER
A.DUB
AG-DV2500
MIC REMOTE INPUT
OFF LINE
9PIN WIRELESS DV S-VIDEO
POWER button
POWER
VCR
DISPLAY
STILL
/I
BARS BLANK
MODE
AUDIO
MUTING
MENU SEARCH+
OUT SEL.
SET
OUT LEV.
SEARCH–
REC
A.DUB PAUSE
F.REV
F.ADV
PLAY
REW FF
STOP
INDEX INDEX
– +
VEQ3533

Turning off the power

Stop all operational activities of the unit.
1.
Press the POWER button on the unit or the remote controller.
• The unit will enter the POWER OFF mode and the POWER indicator will light up red.
2.
If the unit is not to be used for a long period of time, please unplug the AC adapter.
• To disconnect the AC adapter, please unplug the mains cable from the socket first.
REC
DVCAM NTSC PAL REC INH.
1 / 3
CH
REW
2 / 4
AUDIO
When the unit is in the POWER OFF
mode (the POWER indicator lights up
red), press the POWER button on the
unit or the remote controller.
PLAY
• The power is turned on and the POWER indi-
cator lights up green. The unit is now ready for
STO
operation. (POWER ON mode)
Memo
• Once a cassette has been loaded in the
POWER OFF mode, power will be turned on
and the POWER ON mode will be engaged.
• The remote controller is only effective when
the REMOTE switch is set to "WIRELESS".
Note
• After pressing the POWER button and turning
on the power, if the LED blinks in green or the
"UNPLUG MAIN POWER, PLUG BACK IN
AFTER A WHILE" is displayed on the monitor,
please unplug the mains cable from the outlet
and then wait for some time before plugging it
in again.
E-27