RS Pro 124-4133 Mode D'emploi page 3

To prevent accidents and failures, be sure to take the following precautions:
** Do not strike the handpiece against hard surfaces or otherwise subject it to
physical shock.
** Be sure the unit is grounded. Always connect power to a grounded receptacle.
** Do not disassemble the machine.
** Do not modify the unit.
** Use recommended replacement parts.
** Do not wet the unit or use the unit with wet hands.
** Remove power cord by holding the plug – not the wires.
** Make sure the work area is well ventilated.
** The product is not intended for use by children or infirm persons without
supervision.
** Children should be supervised to ensure that they do not play with the product.
Packing list and name of parts
Name of Parts
Temperature
Display
Airflow adjustment
knob
Power Switch
Packing List：
SMD Rework Station (include holder) x1
Heat Gun x1
Air nozzle x 3
Power cord x2 (EU & UK power cord)
User's manual x1
Calibration
Heat gun holder
Temperature
adjustment button
Heat gun
EN-2