Safety Instructions - RS Pro 124-4133 Mode D'emploi

SAFETY INSTRUCTIONS

Warnings and cautions are placed at critical points in this manual to direct
the operator's attention to significant items. They are defined as follows:
WARNING: Failure to comply with a WARNING may result in serious injury or
death.
CAUTION: Failure to comply with a CAUTION may result in injury to the
operator, or damage to the items involved.
NOTE : A NOTE indicates a procedure or point that is important to the process
being described.
EXAMPLE: AN EXAMPLE is given to demonstrate a particular procedure,
point or process.
Be sure to comply with following WARNINGS and CAUTIONS for your safety.
WARNING
Do not change or disassemble any components related to this product, as it
may result in the product being damaged.
When you need to replace the fuse, be sure to turn off the power before
operating.
Whilst operation, do not turn off the power suddenly; place the heat gun in the
holder and turn off the power once it has cooled down. Failure to do so may
damage the product.
CAUTION
When the power is ON, the temperature of the hot air and the nozzle ranges
from 100 to 450℃(212 to 842℉). To avoid injury to personnel or damage to
items in the work area, observe the following:
** Do not direct the hot air toward personnel or touch the metal parts near the
nozzle.
** Do not use the product near combustible gases or flammable materials.
** Advise those in the work area that the unit can reach very high temperatures
and should be considered potentially dangerous.
** Turn the power OFF when no longer using or when leaving it unattended.
** Before replacing parts or storing the unit, allow the unit to cool and then turn
the power OFF.
EN-1