Zephyr Pyramid ZPY-E30AB Guide D'utilisation, D'entretien Et D'installation page 13

Note: To use hood in air recirculating mode please purchase recirculating kit ZRC-0200
Unscrew and remove the front cover
bracket
center
panel
component. Screws are pre-installed to the hood.
panel then re-install screws..
front slot
back slot
1. Remove air diverter plate slot covers. Remove metal
air diverter plate from front slot and re-position to back
slot. Re-install air diverter plate covers.
bracket
11
metal air
diverter
plate