Zephyr Pyramid ZPY-E30AB Guide D'utilisation, D'entretien Et D'installation page 11

ELECTRICAL
WARNING
All Electrical work must by performed by uali ed electrician or person with similar technical
knowledge and background.
For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use
extension cord or adapter plug with this appliance.
Follow national electrical codes or prevailing local codes and ordinances.
Electrical Supply:
This appliance requires a 120V 60Hz electrical supply, and connected to an individual, properly
grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must
be 2 wire w/ ground. Please refer to Electrical Diagram labeled on product.
Cable Lock:
requirements and codes, purchase and install appropriate connector if necessary.
ZPY-ExxAx, ZTA-ExxAS - 207 Watts, 2 Amps.
ZPY-ExxAx290, ZTA-ExxAS290 - 186 Watts, 2 Amps.
Cable Lock
9