Network Configuration - Bodet HARMONYS Flash Notice D'installation Et D'utilisation

3.2 Network configuration
This page can be used to configure the device on the network as follows:
- MAC address: this is the MAC address of the device. This address is unique to each product. This number is
indicated on a label on the rear of Bodet devices.
- Name: product name + MAC address (by default). It is advisable to include the physical location of the device in the
name of the product. Example: Flash_Home
- Enable DHCP tick box: enables automatic definition of the IP settings of the product on the network (where a DHCP
When the Enable DHCP tick box is not checked, the following parameters can be set manually:
- IP Address: allows manual definition of the product's IP address.
- Mask: the subnet mask can be used to associate a device with the local network.
- Gateway: the gateway can be used to connect the device to two computer networks.
- DNS address: address which can be used to associate a product name with an IP address. This eliminates the need
to enter an IP address into the browser, as it can be replaced with a number or name defined by the
user, Example: www.bodet.com being easier to remember than 172.17.10.88.
The Save and Reboot button can be used to save data changes in the concerned device, and then restart it.
server is present on the network).
EN
7