General Points; Unpacking The Harmonys; Cleaning; Pré-Requisit - Bodet HARMONYS Flash Notice D'installation Et D'utilisation

1. GENERAL POINTS

Thank you for choosing the Bodet HARMONYS Flash. This product has been carefully designed to meet your needs
in accordance with ISO9001 quality standards.
We recommend that you read this manual carefully before using the product for the first time.
Retain this manual throughout the lifespan of your product so that you can refer to it when necessary.
Failure to follow these instructions may cause irreversible damage and invalidate the warranty.
Non-contractual data. BODET reserves the right to make certain changes to its devices, regarding functional,
technical, aesthetic or colour characteristics, without prior notice.
This manual is subject to change without notice. To obtain the most recent version of this document, please refer to
our website: www.bodet-time.com.

1.1 Unpacking the Harmonys

For 907795, it must contain :
• Harmonys Flash for indoor environment,
• Quick start guide.

1.2 Cleaning

Use an antistatic product.
Never use alcohol, acetone or other solvents which may damage product casing.
1.3 Pré-requisit
For the commissioning of the Harmonys Flash, you must install the SIGMA software (supplied on CD with your mas-
ter clock) on your PC. To download the latest version of the software, contact our export department who will send
you the download links by email: export@bodet-timesport.com.
to check compatibility of your equipment and the software version, please have the version of your
master clock.
The Ethernet network connection to which the Bodet Harmonys is connected must be PoE, the power
being supplied by a PoE switch or a PoE injector. Make sure that the power capacity of your switch or
injector is sufficient to power your product.
4
EN