Use - Web Server; Home - Bodet HARMONYS Flash Notice D'installation Et D'utilisation

3. USE - WEB SERVER

There are two methods of accessing the web interface:
1- Open a page in your internet browser then, in the search bar, enter the IP address of the product present on your
network (for example, 192.0.1.128).
2- Use the Sigma software, in the menu Configuration > IP devices > Harmonys Flash tab click on the button Web
server access to open the web server (refer to software manual, 607726).
The SIGMA software can be used to:
- detect the devices present on the network,
- configure each device (independently of each other, or copy the settings of one device to a group of devices),
- update the device's software version,

3.1 Home

The home page contains the following general information:
- Product: product type.
- Name: product name + MAC address (in correspondence with the MAC address noted on the product identification
label during installation). By default: "Bodet-MAC address" (modifiable in the Network configuration
menu). The default value can be used to locate the product on the network on commissioning.
6
EN