Troubleshooting; Fault Causes And Rectifi Cation - SilverCrest SHLF 2000 B1 Mode D'emploi

Troubleshooting

GB
IE
Fault causes and rectifi cation
Fault
The appliance
will not switch
on.
The appliance
is not providing
heat.
16
This section contains important information on fault identifi cation and rectifi ca-
tion.
WARNING
Observe the following safety information to avoid risks and property damage:
► Repairs to electrical appliances may only be carried out by specialists
trained by the manufacturer. Improper repairs can cause considerable
risks to users and damage to the appliance.
The following table will help to identify and rectify minor faults:
Possible cause
The plug is not connected.
The mains power socket is not
supplying power.
The main switch
10
switched on.
The heating element is defective.
NOTE
► If you are unable to resolve the problem applying any of the aforementioned
methods, please contact the Customer Service department.
Rectifi cation
Insert the plug into the mains power
socket.
Check the house's mains fuse.
is not Set the main switch
Get in touch with Customer Services.
to "I".
10
SHLF 2000 B1