Set-Up Location Requirements; Before Initial Use - SilverCrest SHLF 2000 B1 Mode D'emploi

Set-up location requirements

GB
IE
■
■
■
■
■
■

Before initial use

■
10
DANGER
Fire risk through contact with materials!
There is a risk of fi re if the heating elements come into contact
with fl ammable materials!
► Do not place the appliance in the vicinity of curtains and other fl ammable
materials.
► Do not allow fl ammable materials (e.g. textiles) to come into contact with
the appliance.
► Do not cover the appliance.
For safe and trouble-free operation of the appliance, the set-up location must fulfi l
the following requirements:
The appliance must be placed on a fi rm, fl at and horizontal surface.
Minimum spacings to the housing of 50 cm to the sides, 50 cm above, 50 cm to
the rear and 100 cm to the front must be maintained.
Do not place the appliance in a hot, wet or extremely moist environment or in the
vicinity of fl ammable materials.
The mains power socket must be easily accessible so that the power cable can
be easily disconnected in an emergency.
Environmental temperature range: 0 to +40°C
Humidity (no condensation):
Remove all packaging materials and all transport locks from the appliance.
NOTE
► Light odour formation can occur during initial use. This is normal and is
completely harmless.
5–75%
SHLF 2000 B1