Handling And Operation; Indicators On The Display; Remote Control; Switching The Appliance On And Off - SilverCrest SHLF 2000 B1 Mode D'emploi

Handling and operation

GB
IE

Indicators on the display

Remote control

Switching the appliance on and off
12
This section provides you with important information on handling and using the
appliance.
The selected setting is shown on the display
SET ROOM
TEMP TEMP
Swivel function is switched on
Low heat output: appliance produces 1000 W
High heat output: appliance produces 2000W
Timer function: appliance runs for the preset time
Frost protection function display
Room temperature display
Preset target temperature display
As soon as the appliance starts working, the control lamp lights up
The appliance can be controlled via the control panel
control 20 . The numbers given in the text references are valid for the control
2
panel or the remote control
♦ Attach the mains plug into a wall outlet corresponding to the technical data
(see chapter "Technical data").
♦ Switch the appliance on by setting the main switch
The main switch
10
the display .
11
♦ To switch the appliance off , move the main switch
.
11
.
20
lights up and the current temperature
19 .
2 or with the remote
to the "I" position.
10
is shown on
to the "0" position.
10
SHLF 2000 B1