Installing The Avabag System - Ortovox AVA BAG Manuel D'utilisation

INSTALLING THE AVABAG SYSTEM

WARNING: THE AVABAG BACKPACK MODELS HAVE DIFFERENT HANDLE CABLE OPENINGS (G)
Handle cable opening (G) for ASCENT
. To open the AVABAG compartment (Z ) open the
cover of the burst zipper (B) and the burst zipper (A).
. Remove the activation handle (T) from the activation
cable with silver ball (O) (see page
activation cable with silver ball (O) through the
handle cable opening (G) in the shoulder strap.
. Insert the AVABAG system (P) into the AVABAG
garage (Y) and attach to the backpack using the
orange AVABAG clip fastening (H) and AVABAG hook
and loop fastener (I).
. Now, to secure the system, insert the cartridge
bushing (Q) into the mesh pocket eyelet (Z) which
will connect the main compartment (Z ) with the
AVABAG compartment (Z ).
48
/ S Handle cable opening (G) for FREE RIDER
. Using the three T-hooks, (F) attach the AVABAG
balloon (N)to the AVABAG eyelets (S) according to
the specified color code.
To make installation easier, start with the hook (F)
). Lead the with red strap and connect it with the red AVABAG
eyelet (S) on the AVABAG balloon (N). Make sure
that the AVABAG balloon (N) is not twisted when
installed.
. Fold the AVABAG balloon (N) (as on page
the AVABAG compartment (Z ) and close it.
. Remount the activation handle (T) on the activation
cable with silver ball (O) in the desired position (see
page ).
/ S // ASCENT
/ ) into