Specific Safety Information; Lt1000 Safety; Description, Specifications And Standard Equipment Description - RIDGID SeeSnak LT1000 Mode D'emploi

SeeSnake

Specific Safety Information

WARNING
This section contains important safety information that is
specific to this equipment.
Read these precautions carefully before using the LT1000
to reduce the risk of electrical shock or other serious per-
sonal injury.
SAVE THESE INSTRUCTIONS!
Keep this manual with the machine for use by the operator.
The EC Declaration of Conformity (890-011-320.10) will
accompany this manual as a separate booklet when re-
quired.
If you have any question concerning this RIDGID
– Contact SeeSnake HQ Support Department at
HQSupport@seesnake.com for questions relating
to HQ.
– Contact your local RIDGID
– Visit www.RIDGID.com or www.RIDGID.eu to find
your local RIDGID contact point.
– Contact RIDGID Technical Services Department at
rtctechservices@emerson.com, or in the U.S. and
Canada call (800) 519-3456.

LT1000 Safety

• An improperly grounded electrical outlet can cause
electrical shock and or severely damage equip-
ment. Always check work area for a properly grounded
electrical outlet. Presence of a three prong or GFCI out-
let does not insure that the outlet is properly grounded.
If in doubt, have the outlet inspected by a licensed elec-
trician.
• Use only a battery or the included isolated power
supply to power the LT1000. Use batteries or an
isolated power supply with any laptop used with the
LT1000. This minimizes the risk of electrical hazards
from moisture or faulty electrical outlets.
• Do not operate this equipment if operator or ma-
chine is standing in water. Operating machine while
in water increases the risk of electrical shock.
• The LT1000 is not waterproof. It is dust-resistant
and splash-resistant. Do not expose the equipment to
water or rain. This increases the risk of electrical shock.
• Do not use where a danger of high voltage contact
is present. The equipment is not designed to pro-
vide high voltage protection and isolation.
• Read and understand this operator's manual, the
reel operators' manual and the instructions for
any other equipment in use and all warnings be-
fore operating the LT1000. Failure to follow all in-
4
® LT1000
® product:
® distributor.
struction may result in property damage and/or serious
personal injury.
• Always use appropriate personal protective equip-
ment while handling and using equipment in drains.
Drains may contain chemicals, bacteria and other sub-
stances that may be toxic, infectious, cause burns or
other issues. Appropriate personal protective equip-
ment always includes safety glasses, and may include
equipment such as drain cleaning gloves or mitts, latex
or rubber gloves, face shields, goggles, protective cloth-
ing, respirators and steel-toed footwear.
• If using drain cleaning equipment at the same time
as using drain inspection equipment, only wear
RIDGID Drain Cleaning Gloves. Never grasp the ro-
tating drain cleaning cable with anything else, including
other gloves or a rag. They can become wrapped
around the cable, causing hand injuries. Only wear
latex or rubber gloves under RIDGID Drain Cleaner
Gloves. Do not use damaged drain cleaning gloves.
• Practice good hygiene. Use hot, soapy water to wash
hands and other exposed body parts exposed to drain
contents after handling or using drain inspection equip-
ment. Do not eat or smoke while operating or han-
dling drain inspection equipment. This will help prevent
contamination with toxic or infectious material.
Description, Specifications And
Standard Equipment
Description
The SeeSnake ® LT1000 is a convenient interface and
platform which allows any standard laptop to serve as a
SeeSnake Inspection monitor, and can be used to auto-
matically capture photos, motion clips and sound record-
ings from a SeeSnake Pipe Inspection System. It provides
a convenient interface to SeeSnake HQ report generating
and video managing software to make creating and man-
aging customer reports quick and easy.
The LT1000 also provides a robust laptop platform to
which the laptop can be rapidly secured and connected,
and easily removed when needed. Two platform wings
may be used to increase the work platform area. The in-
dividual platform wings may be separately folded in, to pro-
vide platform support across the center of the SeeSnake,
or they may be folded out to extend platform support at ei-
ther end of the LT1000.