with hot surfaces or steam.
• Always remove the plug from
the power socket before
moving the appliance.
• Do not operate the appliance
by means of an external time
switch or a separate remote
control system.
• If an extension lead is
required, use a 10 amp power
cord. Power cords with a lower
amp rating may burn out.
When positioning the power
cord, make sure that it cannot
be pulled on or tripped over.
• Avoid overloading by
30
Instruction manual
not connecting too many
appliances to a group.
• Do not use any other high
voltage appliances in the
same group, to avoid
overloading.
• Never immerse the appliance,
the plug or the housing in
water or other liquids, to avoid
the risk of electric shock.
• Do not touch the appliance
if it has fallen into water.
Remove the plug from its
socket, turn off the appliance
and do not use it again.
• Do not use the appliance
TM-6660