IKEA TURBULENS Mode D'emploi page 9

ENGLISH
Lamp maintenance
Disconnect the hood from the electricity.
Warning
Prior to touching the light bulbs ensure they
are cooled down.
1. Use a small screwdriver as a lever on the
borders of the lamp in order to remove
the lightbulb
2. Replace the damaged lamp
Only use 10W max - GU4 - 12V - Ø
35mm - 30° - Dichroic halogen lamps
Important: make sure you don't touch the
lamp with your bare hands.
3. Carry out the replacement and mount the
new lightbulb by following instructions in
the reverse.
9