operating your appliance
EN
2.3.2 turndown
Manual adjustments to your fireplace must only be made when the appliance is off and complete cool.
Allow safety barrier to cool before making adjustment.
The BL36-1/BL46 models are equipped with a manual gas control knob (located on the valve) that adjusts the
flame height to suit your preference. To access the gas control knob, remove your safety barrier, control cover and
door trim (see "maintenance" section for instructions on how to remove these components.
Use only your hand to turn the gas control knob (never use tools). If the knob will not turn by hand, do not try to
repair it. Contact a qualified technician.
An optional remote control is available to turn the appliance on and off without the need to remove the safety
barrier, refer to the instructions provided with the remote control.
10
W415-3092 / 07.13.21