functions
INPUT MODE
You can select D.IN, AUX, HDMI, BT, TV input or USB input.
Press an appropriate button on the remote control to select a desired mode, or press
D.IN, AUX, HDMI, BT, TV or USB mode.
Input mode
Optical Digital input
AUX input
HDMI input
BLUETOOTH mode
TV mode
USB mode
The unit turns off automatically in the following situations:
• BT/TV/USB/HDMI/ARC/D.IN MODE
- If there is no audio signal for 20 minutes.
• AUX Mode
- If there is no KEY input for 8 hours when the AUX cable is connected.
- If the AUX cable is disconnected for 20 minutes.
Use the provided cable if you cannot connect a USB flash memory device directly to the unit.
ARC (HDMI OUT)
• The ARC function allows digital audio to output via the HDMI OUT (ARC) port.
It can be enabled only when the Air Track is connected to a TV that supports the ARC function.
• Anynet+ must be turned on.
This function is not available if the HDMI cable does not support ARC.
The ARC function is activated in D.IN mode if you have connected the unit to a TV that
supports ARC.
To turn off the ARC function, turn Anynet off.
Display
D.IN
AUX
HDMI
BT
TV
USB
HDMI Cable
repeatedly to select from
TV
SOURCE
SOURCE
SOURCE
AUX
USB
BT
SOUND
SOUND
HDMI
D.IN
SHARE
SHARE
15