Installer Final Checklist - Jackson Grills LUX Serie Manuel Du Propriétaire

LEAK TEST SAFETY TIPS:
◼
1. Always check for leaks after every propane cylinder change.
2. Always check for leaks at every connection before use. (Including natural gas quick release hook up)
3. If any grease or hot products fall on the valve, regulator, hose or any part that conveys gas, shut gas off
immediately, check the cause and rectify it. Perform a complete leak test before reusing the grill.
4. If the smell of gas is detected, immediately shut off gas or disconnect from source, and repair leaks before
further attempts are made to use the grill.
Jackson Grills Support: 1-888-287-3333 or
Ensure that clearances to combustible materials are maintained per specifications listed in this manual.
Make sure that all internal packaging has been removed.
Check that the burners are sitting properly on orifice end of the valves. (p.6)
Check grill label to confirm that the gas configuration matches the fuel being supplied
When using natural gas; ensure the appliance pressure (between NG regulator
and main manifold) is at 4" WC.
For propane grills confirm that inlet pressure is at 11" WC; NOTE that the original
Jackson regulator and hose are preset to 11" WC.
Ensure that all the gas knobs turn freely.
Leak test grill and all gas connections.
Grill test fired, and all functions working and in good order.
User informed of gas supply shut off valve location.
Owner's manual given to grill user.
Installer Final Check List:
14
!WARNING!
Propane and Natural Gas are
very flammable; exercise
extreme caution while checking
for, and repairing gas leaks.
info@jacksongrills.com
Optional # JGSB Side Burner
-Fits on right side
-For built in kitchen or
-Comes with stationary side shelf
-Not available for JLS400-LP/NG