Festo SPC200 Mode D'emploi page 17

2 Important user instructions
The SPC200 serves, in conjunction with the relevant com
ponents and modules, as a closed−loop position controller
for pneumatic axes and as position controller for electric
axes.
This brief overview contains a summary of the steps
necessary for commissioning a positioning system with
pneumatic axes.
Detailed information on the SPC200 can be found in the
system manual for the SPC200 (type P.BE−SPC200−...).
Information on special extension modules can be found in
the manuals for the relevant module.
Caution
This brief overview is intended exclusively for techni
cians trained in control and automation technology,
who have experience in installing and commissioning
the SPC200.
You must observe the technical safety measures in the
system manual of the SPC200, type P.BE−SPC200−... .
Warning
Before carrying out installation and/or maintenance
work, switch off the following in the sequence
specified:
1. the compressed air supply,
2. the load voltage and operating voltage supplies for
the SPC200 and, if applicable, the load voltage sup
ply for the axis interface string.
Festo SPC200−... 0504c English 17