Preparing The Machine - TMB OPTIMIST Manuel D'utilisation Et D'entretien

OPTIMIST is a machine manufactured by TMB Srl is intended for the professional sanitization and
deodorisation of means of transportation in general by nebulising appropriate deodorising and disinfecting
products. The machine is to be used exclusively for this purpose.
Even the best machine can operate accurately and effectively only when properly used and maintained in
a perfect state. Therefore, please read this instruction booklet carefully and retain it for future reference.
This manual is a guide and it provides all practical information for machine safety, operation, adjustment
and maintenance. Prior to delivery, the machine has been checked by our technicians in order to
guarantee perfect performance. For these conditions to be maintained, please comply carefully with the
general maintenance operations that are described in this manual.

PREPARING THE MACHINE

• Take the machine off the pallet.
• Check that the mains socket matches the data provided on the identification plate and make sure that
the earthing system is working. Avoid using adapters or multiple-socket outlets to prevent over-heating.
• Always protect the outlet with an appropriate magneto-thermal switch and with a differential switch with a
time delay equal to or less than 0,03A
NOTE: For proper and long machine life, use only products which are recommeded by the
manufacturer.
• Fill up the tank through the hole (1). The tank can hold about 3 litres of the product.
• Make sure that the spiral hose is free and not entangled.Insert the plug in the mains outlet after
checking that the general switch is on "0" or the OFF position (2). Keeping the lever of the pump nozzle
down (3), switch on the machine with the general switch.
• Wait a minute or so until the product completely fills the tube and begins to be emitted in a nebulized
form, once the sanitization is finished, release the dispenser lever and turn off the machine.
GENERAL CONSIDERATION
INTRODUCTION
18