The descriptions contained in this document are not binding. The company therefore reserves the right to make any modifications at any time to elements, details, or
accessory supply, as considered necessary for reasons of improvement or manufacturing/commercial requirements. The reproduction, even partial, of the text and
drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply modifications. The images are shown as a reference only, and are not binding as to
the actual design and/or equipment.
Open book symbol with an "i":
Indicates the need to consult the instruction manual.
Open book symbol:
Tells the operator to read the manual before using the appliance.
Covered place symbol:
the operations preceded by this symbol must always be carried out in a dry, covered area.
Warning symbol:
Carefully read the sections marked with this symbol and observe the indications, for the safety of the operator and the appliance.
Protective gloves symbol:
Always wear protective gloves, to avoid the risk of serious injury to your hands.
Warning symbol that the carriage is moving:
Indicates that the packed product should be handled with suitable lifting means that comply with the legal requirements.
Explosion risk symbol:
indicates that the battery may explode in certain conditions, if not handled in accordance with the directives indicated in the manufacturer's
manual.
The aim of this manual is to provide customers with all the information needed to use the appliance in the safest, most appropriate and most autonomous way. It includes
information concerning technical aspects, safety, operation, appliance downtime, maintenance, spare parts and scrapping. Operators and qualified technicians must
read the instructions in this manual carefully before carrying out any operation on the appliance. If in doubt about the correct interpretation of instructions, contact your
nearest Customer Service Centre to obtain the necessary clarifications.
This manual is aimed at operators and qualified technicians responsible for appliance maintenance. Operators must not perform operations that should be carried out
by qualified technicians. TMB S.r.l.. cannot be held liable for damages resulting from failure to comply with this prohibition.
The Use and Maintenance Manual must be stored in its special pouch close to the appliance, protected from liquids and anything else that could compromise its
legibility.
When the machine is delivered to the customer, an immediate check must be performed to ensure all the material mentioned in the shipping documents has been
received, in addition to verifying that the equipment has not been damaged during transportation. If this is the case, the carrier must ascertain the extent of the
damage at once, informing our customer service office. It is only by prompt action of this type that the missing material can be obtained, and compensation for damage
successfully claimed.
Any type of equipment can only work properly and effectively if used correctly and kept in full working order by performing the maintenance operations described in the
attached documentation. You should therefore read this instruction manual carefully, consulting it again if difficulties should arise while using the machine. If necessary,
remember that our assistance service (organised in collaboration with our dealers) is always available for advice or direct intervention.
For technical assistance or to request replacement parts, always give the model, the version and serial number written on the serial number plate.
This appliance has been designed and manufactured for the mechanized diffusion of appropriate disinfecting/deodorizing solutions, to be carried out by following the
instructions. The appliace must only be used for this purpose.
SYMBOLS USED IN THE MANUAL
PURPOSE AND CONTENT OF THE MANUAL
TARGET GROUP
STORING THE USE AND MAINTENANCE MANUAL
ON DELIVERY OF THE APPLIANCE
INTRODUCTORY COMMENT
IDENTIFICATION DATA
TECHNICAL DESCRIPTION
16