Product Description; Product Structure; Description Of The Screen; Settings - Lanaform PO-100 Mode D'emploi

The results of measurements are pro-
vided for information only.
• Self-diagnostics or self-medication
based on the results obtained are dan-
gerous. Please consult a doctor.
• Do not try to charge dry-cell alkaline
batteries and do not throw them onto
a fire. They could explode.
• Do not dismantle the oximeter and do
not try to repair it. It could be perma-
nently damaged.
• During the measuring process, do not
use a mobile phone or any other de-
vice likely to cause electromagnetic
interference.

05 Product description

Based on entirely digital technology, the
finger pulse oximeter measures in a non-in-
vasive manner the actual content (oxygen
saturation) of oxyhaemoglobin (HbO2) in
arterial blood by using the optical trans-
mission method.
M-PO100-001.indd 5 M-PO100-001.indd 5
The finger pulse oximeter measures the
blood's oxygen saturation and the pulse
of a human body via the finger's artery. It
applies to a wide range of areas, such as
families and clinics. Use this instrument
for measuring before or after sport. Use
of this instrument is not recommend-
ed during sports activities. Do not use it
for the continuous treatment of patients.

06 Product structure

03
01
02
01 OLED screen
02 Power button
03 Battery cover
04 Battery cover lock
07 Description of the
screen 2
01
05
06
07
08
01 Battery level indicator
02 Pulse symbol
1
03 Pulse modulation index
04 Pulse rate value
05 Oxygen saturation symbol
06 Oxygen saturation value
04
07 Bar graph
08 Plethysmograph

08 Settings

3
After turning on the oximeter, hold the
power button down for about a second.
The oximeter displays a configuration in-
terface. Press the button or hold it down to
carry out the corresponding operations:
hold it down to define a part or press it
once to change option or display mode.
02
03
04
31/07/2020 16:16:20 31/07/2020 16:16:20