Lanaform PO-100 Mode D'emploi page 4

∙ The oximeter probe is place on the
same part of the body or same limb
as with the arterial duct of the blood
pressure cuff.
∙ The user suffers from hypotension,
severe vascular atrophy, severe anae-
mia or lack of oxygen.
∙ The user is in sudden cardiac ar-
rest or in shock.
∙ Nail polish or false nails may cause
incorrect oxygen saturation or pulse
readings.
• Take care of the measuring probe lens,
which is fragile.
• Remove used batteries with care. In order
to protect the environment, used batter-
ies should be sent to a collection point
provided for this purpose.
• Remove the batteries when the oximeter
is not in use for more than two months.
• Do not immerse the oximeter in water or
expose it directly to sunlight.
• Do not expose the oximeter to vibra-
tions or shocks.
M-PO100-001.indd 4 M-PO100-001.indd 4
• Clean the oximeter probe after each
time it is used.
• Do not use the oximeter for purposes not
specified in this manual. Follow the in-
structions in the chapter "Instructions
for use" and use the oximeter with care.
• The oximeter is not watertight so do no
immerse it in water or any other liquid.
Clean and disinfect the oximeter as de-
scribed in the "Cleaning and disinfecting
routine" chapter.
• Do not touch the tip of the measur-
ing probe.
• Keep the measuring probe clean to
maintain the accuracy of the readings.
• The ambient temperature must not be
too high or too low. For accurate read-
ings, keep the oximeter at an ambient
temperature for more than 30 minutes
before using it.
• Do not use the oximeter at an ambient
temperature above 40°C (104°F) or be-
low 5°C (41°F). These temperatures are
beyond the oximeter's operating range.
• Risk of pollution! The recommendation
is that the used oximeter should be de-
posited in a recycling centre.
• 2×1.5V AAA batteries (supplied) are the
only replaceable accessories of the ox-
imeter. Do not use batteries of other
voltages or specifications.
Warning
• Do not use the oximeter in an envi-
ronment containing flammable gases,
flammable anaesthetic or other flam-
mable substances.
• Do not use the oximeter in an MRI or
CT environment.
• Do not use the oximeter when it is humid
with overflow or water vapour conden-
sation. Do not move the oximeter from
an excessively cold environment to a
high-temperature humid environment.
• Keep the oximeter out of the reach
of children.
• Use of a used oximeter could cause in-
accurate readings.
• The oximeter is not designed to diag-
nose or treat a health problem or illness.
31/07/2020 16:16:20 31/07/2020 16:16:20