Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Introduction
Thank you for choosing the pulse oxime-
ter by LANAFORM.
The Pulse Oximeter is a non-invasive meth-
od used to measure blood oxygen saturation
(
) by checking the percentage of oxy-
SpO
2
gen-saturated haemoglobin as well as the
pulse modulation index (PMI) and heart
rate measurement. This process has been
in regular use now for twenty years and is
proving to be an essential control in medi-
cal practice for maintaining oxygen levels
and preventing respiratory problems. The
value of the oxygen saturation may be re-
garded as dangerous if it is below 90% for
arterial blood. Normal value is 100% under
normal atmospheric conditions.
Please read all the instructions before
using your product, particularly these
basic safety instructions.
M-PO100-001.indd 2
M-PO100-001.indd 2
E N G L I S H
The photographs and other images
of the product in this manual and on the
packaging are as accurate as possible,
but do not claim to be a perfect repro-
duction of the product.
Contents
01 Unpacking
netic emissions
21 Waste disposal
01 Unpacking
Please open the packaging carefully be-
fore use. Check whether all the accessories
are present and whether any components
have been damaged during transport and
follow the installation and operating in-
structions in this manual. In the event of
any damage or malfunction, please con-
tact the reseller or Lanaform directly. In
the event of any complaint, you will need
the model of the device, serial number, date
of purchase, your details and your address.
31/07/2020 16:16:20
31/07/2020 16:16:20
Publicité
Chapitres
Table des Matières
