Powering On; Powering Off; Charging The Sx.com - Nexx SX COM Mode D'emploi

SX.COM
3
4
6

Powering On

Press and hold the (+) Button and the (-) Button at the same time for 1
second to power on. The blue LED turns on and you will hear ascending
beeps and "Hello".

Powering Off

Press the (+) Button and the (-) Button at the same time. The red LED
turns on for about 2 seconds until it turns off completely and you will hear
"Goodbye" and descending beeps.

Charging the SX.COM

You can charge the SX.COM by connecting the supplied USB power &
data cable into a computer USB port or USB wall charger. You can use
any standard micro-USB cable to charge the SX.COM. The LED turns
red while charging, and turns blue when the headset is fully charged. It
takes about 2.5 hours to fully charge.