Enabling/Disabling Voice Activated Phone Answering; Enabling/Disabling Voice Prompts; Delete All Bluetooth Pairing Information - Nexx SX COM Mode D'emploi

SX.COM
The voice prompts for each menu item are as below:
(1) VOX phone
(2) Voice prompt
(3) Delete all pairings
(4) Factory reset
(5) Exit configuration

Enabling/Disabling Voice Activated Phone Answering

Voice Prompt
Factory Default
Enable / Disable
If this feature is enabled, you can answer incoming calls by simply
saying a word loudly enough, unless you are connected to intercom. For
example, when you hear a series of beeps for an incoming call, you can
answer the phone by saying "Hello" or any other word loudly. However,
the phone VOX feature does not work if you are connected to intercom.
This is enabled from the factory but you can disable this. If this mode is
disabled, you have to press the (+) Button to answer an incoming call.
18
"VOX phone"
Enable
Press the (-) Button

Enabling/Disabling Voice Prompts

Voice Prompt
Factory Default
Enable / Disable
You can disable voice prompts by configuration setting, but the following
voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset

Delete All Bluetooth Pairing Information

Voice Prompt
Factory Default
Execute
To delete all Bluetooth pairing information of the SX.COM, press and hold
the (+) Button until you hear a voice prompt, "Delete all pairings", and
press the (-) Button to confirm.
"Voice prompt"
Enable
Press the (-) Button
"Delete all pairings"
N/A
Press the (-) Button