SX.COM
6.
INTERCOM CONVERSATION
6. INTERCOM CONVERSATION
Pairing with Other SX.COM Headsets for Intercom
Conversation
The SX.COM can be paired with another headset for Bluetooth intercom
conversation.
1. Turn on the two SX.COM headsets (A and B) that you would like to
pair with each other.
2. Press and hold the (-) Button of the headset A and B for 5 seconds
until the red LEDs of both units start to flash rapidly. You will hear a
voice prompt saying "Intercom pairing".
3. Simply press the (-) Button of either of the two headsets A or B (It
doesn't matter that you choose A or B) and wait until the LEDs of
both headsets turn to blue and intercom connection is automatically
established. The two SX.COM headsets A and B are paired with
each other for intercom conversation. If the pairing process is not
completed within one minute, the SX.COM will return to stand-by
mode.
16
Starting and Ending Intercom Conversation
1. You can start an intercom conversation with your intercom friend by
pressing and holding the (-) Button for 1 second.
2. To terminate an intercom conversation, press and hold the (-) Button
for 1 second again.
Intercom and Mobile Phone Call
1. When you have an incoming mobile phone call during an intercom
conversation, you will hear a ring tone. You can choose whether to 1)
answer the mobile phone call and stop the intercom conversation, or
2) reject the phone call and stay on the intercom conversation.
• To answer the phone call and stop the intercom conversation, press
the (+) Button. When you hang up the phone call, the intercom will
automatically be recovered.
• To reject the phone call and stay on the intercom conversation,
press and hold the (-) Button for 2 seconds until you hear a beep.
Unlike other motorcycle Bluetooth headsets, this prevents a user from
being dropped out of an intercom conversation by an incoming mobile
call.
2. When you have an incoming intercom call during a mobile phone call,
you will hear 4 high tone beeps, alerting you that there is an incoming